HIROSHIMA · JAPAN  |  GLOBAL SERVICE NETWORK
RMGT Engineering Journal

Can a Laser Engraver Cut Metal? What a $4,800 Mistake Taught Me

2026-11-17 · By Elise Marceau

Can a laser engraver cut metal? Yes — but only if it's a fiber laser. If you're looking at a CO2 laser machine, it will not cut metal. Not slowly. Not thin metal. It just won't. I learned this the expensive way: a $4,800 CO2 unit that was supposed to engrave aluminum signage and got returned within three days.

Here's what still bothers me about that order: the customer told us exactly what they needed to cut. The vendor knew. I approved the spec anyway. That's on me.

Why I'm qualified to talk about this (and what it cost)

I handle product management for JPT laser equipment orders. Five years in. I've personally made — and documented — three significant mistakes that totaled roughly $12,000 in wasted budget. Now I maintain the three-page pre-check list our team uses before any equipment order goes through.

The CO2 mistake happened in March 2021. A signage company told me they needed a laser engraver for metal. I mentally swapped "engrave" for "cut" without verifying. The machine arrived, they tried cutting 2mm aluminum, and got a faint scorch mark. CO2 lasers (wavelength 10.6μm) reflect off bare metal almost entirely — the physics just doesn't work.

The difference that actually matters: CO2 vs. fiber

Fiber lasers (wavelength 1.06μm) are the workhorses for metal. They absorb into steel, aluminum, and copper an order of magnitude better than CO2. CO2 machines excel at wood, acrylic, glass, and leather — organic materials. Ask a CO2 laser to cut metal and you're asking a wood saw to cut glass. Different tool, different job.

So when someone searches "can a laser engraver cut metal," what they should really be asking is: what wavelength do I need for my material?

Where the 50W JPT fiber laser fits

Take the 50W JPT fiber laser. For stainless steel and aluminum up to about 2mm, it can mark and cut — slowly, but accurately. It's a solid entry point for fine engraving on thin metal. If you need to cut 10mm steel plate at production speed, it won't do that. But for marking metal tags, custom knives, or jewelry — it's more than capable. Pricing for a 50W JPT fiber laser source typically runs $2,800–$4,500 depending on configuration and dealer (as of January 2025; verify current rates).

JPT vs. Raycus: the comparison that never dies

This comes up in almost every conversation I have. Here's my honest take on 50W-class sources:

  • Price: JPT typically runs 15–20% lower than equivalent Raycus models
  • Beam quality: Raycus has a slight edge on focused spot size specs
  • Delivery: JPT ships faster from China
  • Dealer network: Raycus has broader coverage in China

Neither one is "better." If you need extreme precision, Raycus is worth the premium. If you're optimizing for cost-performance, JPT is a strong contender. Simple as that.

The mistake I only believed after paying for it

"They warned me to check beam spot size before ordering for jewelry engraving. I didn't listen. The 60W JPT unit we ordered couldn't hit the detail the client needed. Cost us $900 in rework plus a delayed delivery."

That was Q3 2022. I now check spot size on every single fine-detail order. No exceptions.

We didn't have a formal pre-purchase verification process until early 2023 — after a separate $5,000 error. The 12-point checklist I built has caught 47 potential issues in the past 18 months. Five minutes of verification beats five days of correction. That's not a slogan. It's math.

The vinyl wrap printing machine question

A printing company asked me recently if they could pair a laser engraver with their vinyl wrap printing machine workflow. They wanted to cut vinyl decals and engrave metal backplates. My answer: use a CO2 laser for the vinyl, a fiber laser for the metal. Buying one machine to do both means doing both poorly.

They ended up running two separate setups. More upfront cost, way fewer headaches.

When this advice doesn't apply

Fiber lasers aren't universal. They can't cut clear acrylic, thick wood, or glass — those need a CO2 machine. If you're looking for one tool that handles everything, it doesn't exist. And if you're cutting metal thicker than about 3mm on a regular basis, a 50W source is undersized. You'll want 100W+.

The other thing: don't buy based on a brand name alone. Ask for a spec sheet with maximum cutting thickness, material type, and speed for your specific use case. If the seller can't provide it, find a different seller. That one rule would have saved me $4,800.

Discuss With an RMGT Engineer